HomeTechnical notes › Distribution Box Model & Spec Guide: Lighting, Power, JP & Meter Boxes in One Table

05 Informational content / Technical articles 2026-09-11 Published ~ 11 min read GB/T 7251.1 · GB/T 7251.12 · GB 7251.3

Distribution Box Model & Spec Guide
Lighting, Power, JP & Meter Boxes in One Table

Too many distribution box models to remember? One table covers it. This guide consolidates lighting boxes, power boxes, JP cabinets, meter boxes, GGD/GCS/MNS and othermainstream models and specs, grouped by application with a selection cross-reference. Zhejiang Golden Unicorn produces 5,800+ units per year.MOQ 1 unit · build to drawing.

1. By Application (6 Categories)

CategoryTypical ModelApplication
Terminal/LightingPZ30/XGMResidential / office final distribution
Power DistributionXL-21/XL-52Workshop Power
General DistributionJPRural Distribution Area
Low-Voltage Main CabinetGGD/GCS/MNSDistribution Room
MeteringPT/PJEnergy Metering
Power Factor CorrectionGGJPower factor correction

2. By Current Rating (4 Tiers)

CurrentModelCabinet width
≤ 63APZ30300–500mm
63–250AXL-21600–800mm
250–630AXL-52/GGD800mm
630–2000AGGD/MNS800–1200mm
SCHEMATICBusbarsTerminal blocksMain circuit breakerControl & protection devicesTerminal block outgoing cables
Figure — 2. By Current RatingCabinet structure diagram · photo pending

3. By Ingress Protection (Indoor/Outdoor)

Protection

Indoor IP30/IP40; outdoor IP54/IP65; rain-exposed environments IP66 + rain hood. Zhejiang Golden Unicorn can build IP65 outdoor stainless steel enclosures.

4. By Mounting Method (Surface/Flush/Floor-Standing)

  1. Surface mount: wall-mounted, enclosure protrudes from the wall
  2. Flush mount: flush-mounted, enclosure sits flush with the wall
  3. Floor-standing: base-mounted, high-capacity main cabinet

5. One-line selection rule (power + circuits + environment)

Power determines the breaker, circuits determine the enclosure, environment determines the ingress protection (IP) rating. If you are not sure, send us your requirements and Zhejiang Golden Unicorn will provide a free solution.

FAQ FAQ

Which distribution box model is best?

There is no single best — only the right fit. PZ30 for residential, XL-21 for workshop floors, GGD for the distribution room. Choose by application.

What is the difference between PZ30 and XGM?

Both are terminal boxes. PZ30 is the national standard designation, XGM is the industry designation. They are largely interchangeable.

Does an outdoor distribution box have to be IP65?

We recommend ≥ IP54. For rain or spray-wash environments, IP65 is required.

Can different models be mixed in one system?

Yes, but the incoming and outgoing specifications must match. Do not pair a large enclosure with undersized circuits.

Related pages:Technical notes · Products · Industries · Resource center · FAQ · Get a quote

Related reading

Need Distribution box, distribution cabinet? Build to drawing · MOQ 1 unit · 15–25 day delivery

A source factory in Zhejiang (Fengchuan Industrial Zone, Tonglu — 5,000 sqm, a team of 20, 5,800+ units a year), holding ISO 9001:2015 / CE(LVD+EMC) / IP65 test report. Build-to-drawing service for distribution boxes, low-voltage assemblies, PLC control cabinets and VFD panels. Free drawing review, photo/video inspection before shipment.